Horntools - cable winch 2,3to Kappa 5.0 12V plastic cable electric winch

The Kappa is the compact winch for compact vehicles up to 1.8 tons such as the Suzuki Jimny, Lada Niva or Jeep Renegade.
 
The extremely compact Kappa series is based on proven technology and is equipped with a 3-stage planetary gear.
 
The cable winch has a 3-year guarantee, but with the right care it can be used for a whole car life without any problems.
 

 
 


Equipment:
 

• 6mm Ø plastic rope 25m long with hook
• Aluminium cable window
• Remote control 1x cable (cable length: approx. 3.70m)
• reinforced relay (contact) waterproof sealed
• detachable control unit (so that the control can be installed as desired)
• Freewheel lever* Gear neutral Stainless steel position
• Cross struts made of stainless steel
• reinforced rope drum** (suitable for use with plastic rope)
• powder-coated aluminium die-cast housing motor/gear unit
• reinforced contact Housing made of deep-drawn sheet metal powder-coated
• Inliegende drum brake with 3 brake shoes
• 3 years warranty
• instruction manual
• Cable length: 1,5m
• Cable cross section: 16mm²

 
*A freewheel lever is used to decouple the gear and to quickly unwind the winch by hand.
 
**Plastic ropes load the rope drums laterally many times more than steel ropes.
 

 
 
Technical data:

• Working range voltage: 10-16 Volt
• max. power consumption 180 Amp )**
• Traction speed load-free 4m/minute
• Tractive force 2300 kg )**
• 3-stage planetary gear 166 :1 reduction ratio
• Net weight: 19.7 kg including rope and rope window
• Permanent Magnet Motor )*
• Drum (Ø x length): 63 x 139 mm
• Total size (L x W x H): 465 x 158 x 215 mm
• Mounting hole size: 166 x 114 mm M10

 
*Series-wound motor with permanent magnets
 
**Values can vary greatly, depending on the battery system the winch can pull up to twice as much. The pulling force is designed for a standard 50AH battery. With more powerful battery systems, the pulling power must be limited by the current strength/voltage.

 

 
Material

The winch is made of aluminium and high-strength stainless steel: High strength so that the steel can withstand the stresses.
Despite the designation as stainless steel, this steel can also rust, i.e. if the parts are exposed to road salt in winter, you should maintain them more frequently and/or apply a thin film of oil in parallel as a preventive measure.
 
ATTENTION:
 
The thin retaining plate shown in the photo is only mounted symbolically: For correct functioning, the winch must always be mounted on a stable plate, as this plate must absorb the entire tractive force as well as any transverse forces via the cable window.