
Drinking water is probably the most important food. We cannot live without the coveted water and use it daily for drinking, cooking, brushing our teeth, showering and washing.
So it is not surprising that the number of taps has grown steadily with the increasing demand for comfort in the motorhome and that today, as a matter of course, hot water preparation in the caravan has become a cherished standard in addition to cold water.
To keep the drinking water clean from the water tank to the tap and to protect it from germs, the water pipes - as well as the tank itself - must be regularly flushed or emptied and, if necessary, cleaned so that the precious commodity does not spoil.
Water and sanitation in caravans and campers
We offer pressure-stable water pipes for both cold water and hot water supply that comply with the strict requirements of the Drinking Water Ordinance. For branches or changes of direction, both bends and distributors can be found in the range, so that additional taps (e.g. for an outdoor shower) can also be installed at a later date.
Here, frost drains are just as much a part of the drinking water pipe system as powerful pumps that build up sufficient water pressure to guarantee real showering pleasure in the sanitary area as at home.
The trend towards self-sufficient living in caravans has been unstoppable since the experience with contact restrictions in the Corona year 2020.
We can help you develop your dream bathroom and kitchen fittings.
Fresh water tank 90...
90 litre fresh water tank (drinking water)
Dimensions: 1150 x 645 x 260 mm
90 litre fresh water tank. The shape of the tank is ideal for mounting above the wheel arch inside the vehicle.
Weight 8.4 kg
Expansion tank 1.4 bar...
Pressure compensation vessel for the drinking water system
Professional quality
- Preset pressure to 1.4 bar
Delivery without connection nipple
Water set for Truma...
Water set Frostcontrol type TB (Truma Combi)
If there is a risk of frost or overpressure, the currentless drain valve opens automatically to empty the boiler via the water pipe.
- Suitable for all Truma boilers.
- No power connection necessary.
- For connecting flexible hoses
Drain valve plastic -...
Drinking water Drain valve plastic
Drain valves can be installed between the water pipe or at its end for emptying.
This enables the hose lines to be emptied completely, which largely eliminates the risk of the water hose freezing and bursting in frosty conditions, for example.
Non return valve 10mm...
Drinking water Check valve
Valve in the line for submersible pump and TRUMA boiler:
Prevents backflow of water from a pipe.
domestic water hose -...
Domestic water hose - warm
White with red line.
Temperature resistant -30° to +90°C.
10 mm inner Ø
16 mm Outer-Ø
Price per running meter
drinking water hose -...
fresh water hose - cold
White with blue line.
Temperature resistant -30° to +90°C.
10 mm inner Ø
16 mm Outer-Ø
Price per running meter
Water pump 12V 7...
Water pump 12V 7 litres/min
- Self-priming 3-chamber diaphragm pump
- cut-off pressure of 1.4 bar
- Delivery rate of 7l/min
Dimensions approx.: L 203 x W 130 x H 123 mm
System connector X-Fix...
System connector X-Fix 10mm distributor 4 outlets
Frost-proof, hot water resistant up to 80°C and pressure resistant
Water flow, hose outside: Ø13-17 mm, hose inside Ø10 mm.
Water distributor flexibly applicable by twisting the connections.
Including nut - no clamp necessary.
With hole for screw for secure fastening.