
Gas hoses
Gas hoses are subject to strict quality requirements. For this reason, you will find many different types of gas hoses in the cara-tech-24 range, but only from well-known manufacturers - such as Truma or GOK.
For example, do you need to replace the gas hose in your caravan or motor home?
GOK gas hoses or Truma gas hoses have a tag on them that tells you how long they are recommended for use, usually 10 years. Then you should basically think about replacing the gas hose anyway, because above all the rubber loses elasticity and can become cracked or porous.
Or are you already looking for a gas hose replacement?
Gas hoses, gas regulators and everything to do with gas that is installed in the vehicle must be checked every 2 years by a specialist.
This is the so-called gas test, which you can have carried out at TÜV, Dekra, FLUS or other testing institutes as part of other regular inspections.
This is not a problem, because at cara-tech-24 gas hoses are available in different designs, sizes and lengths.
Cara-tech-24 also has a large selection of special gas hose designs, e.g. the gas hose connection for retrofitting to the caravan wall for the outdoor barbecue.
Take a look at our range below and order your new camping gas hose directly online.
LPG gas hoses
The "black" gas hoses are high-pressure hoses for fixed installations for tank gas - i.e. LPG or autogas. These hoses are subject to a stricter standard and form a special group of gas hoses here. At cara-tech-24, we have therefore marked these gas hoses with the abbreviation LPG in their names.
Would you like some advice?
Then ask one of our specialists for advice and recommendations on how to produce the right combination of gas hoses, adapters and regulators for your situation.
Gas pipe ø10mm steel...
Gas pipe 10 x 1 mm, galvanised 1.5 m
Precision steel pipe dia. 10 x 1 mm
Design: Supply pipe, galvanised (for gas installations in vehicles)
Delivery unit: 1 piece à 1.5 m length
Gas pipe ø8mm steel...
Gas pipe 8 x 1 mm, galvanised 1.25 m
Precision steel pipe dia. 8 x 1 mm
Design: Distribution pipe, galvanised (for gas installations in vehicles)
Delivery unit: 1 piece à 1.25 m length
Quick-closing valve...
Distribution block type DSV
Quick-closing shut-off valve for 10/8 mm gas pipe
WITHOUT distributor block sticker (symbols for labelling such as heating, hob, refrigerator, etc.)
Connection: SRV 10 and SRV 8
Elbow union type W, 90...
Elbow union type W, 90 degrees, gas pipe
with union nut type M and cutting ring type D
EN ISO 8434-1 - EC
Material: galvanised steel
Selection according to gas pipe outer diameter 8mm or 10mm
Straight screw...
Straight screw connection type G, gas pipe
with union nut type M and cutting ring type D
EN ISO 8434-1 - EC
Material: galvanised steel
Selection according to gas pipe outer diameter 8mm or 10mm
Cutting ring fitting...
Straight screw-on fitting type GAI
Screw-on fitting for domestic cookers, multi-burner hobs with threaded pipe connection in caravans or campervans.
Inlet: Cutting ring fitting
Outlet: Female pipe thread, screw-in hole DIN 3852-2
Form Y without countersink, short version
- Fitting GAIL 8 x G1/2 galvanised
EN ISO 8434-1 - EC
Material: galvanised steel
Gas pipe outer diameter: 8mm
Filling hose 1.5m LPG...
Filling hose LPG tank bottle Multivalve
LPG connecting hose for connecting the tank connection (flat refuelling 21.8) to the tank gas cylinder
1.50 meter filling hose
Weight: 0.7 kg
GOK gas hose for gas...
Gas hose – GOK plug-in coupling
for connection to gas socket, cold-resistant to -30°C, 1x plug-in nozzle, 1x 1/4" union nut with left-hand thread
Weight: 300g