System connector X-Fix 10mm distributor 4 outlets

Frost-proof, hot water resistant up to 80°C and pressure resistant

Water flow, hose outside: Ø13-17 mm, hose inside Ø10 mm.
Water distributor flexibly applicable by twisting the connections.
Including nut - no clamp necessary.


With hole for screw for secure fastening.

Boat Trailer and Caravan Mover - P1

Fully automatic mover - ideal for heavy monoachser up to 2,450 kg

Lightweight drive for your boat trailer including remote control for all commands:

• Waterproof IP67 (up to 2m water depth).
• Stainless steel construction
• Automatic approach to the wheels
• Steering in all directions
• Forward/Reverse
• Soft start for jerk-free slow starting and stopping

 

2 years warranty

Weight: 34 kg

Trailer and Caravan Mover - P1

Fully automatic mover - ideal for heavy monoachser up to 2,450 kg
 
Lightweight drive for your boat trailer including remote control for all commands:
 

• Waterproof IP55 (Protection against water jets according to VDE 0710 DIN 40050)
• Automatic approach to the wheels
• Steering in all directions
• Forward/Reverse
• Soft start for jerk-free slow starting and stopping

 
 
 
2 years warranty

Weight: 34 kg

Submersible pump VIP-PLUS 20l/min

12V connection (2-wire)

Diameter pump 48mm

 

 
Weight 170g

Motor set, 2 pieces P1 mover motor (spare part) - ATA

 
 
Weight:

2x 4.285 kg

Control unit for P1 manoeuvring system

Control unit for the P1 mover in the fully automatic version

 

Length/width/height:

338 x 146 x 54 mm

 


Weight: 1.08 kg

P1 fastening set consisting of clamps and U-bolts with nuts/washers

Spare part for P1 mover

Weight:

2x clamp, top: 1270g

2x clamp, bottom: 880g

2x U-bracket set: 810g

Swing motor for P1 Mover, actuator (spare part), item 13

 
Weight: xx kg

Motor set, 2 pieces P1 mover waterproof motor (spare part) - ATA

 
 
Weight:

2x 4.285 kg

T-tube connector X-Fix

Branch for ø10 mm water hose

System connector X-Fix 10mm distributor 3 outlets

Frost-proof, hot water resistant up to 80°C and pressure resistant

Water flow, hose outside: Ø13-17 mm, hose inside Ø10 mm.
Water distributor flexibly applicable by twisting the connections.
Including nut - no clamp necessary.


With hole for screw for secure fastening.

Winterhoff support wheel type ST 48-CW-255

Drawbar support wheel, galvanised, 48 mm ø, with integrated drawbar load indicator
Soft rubber wheel on steel rim

Tube 480 x 48 mm
Wheel 225 x 70 mm
Stroke approx. 220 mm
Drawbar load max. 150 kg

No TÜV entry required. Scale 0 - 125 kg

 
Weight: Approx. 6.6 kg