Charging booster WA 121525 for additional batteries

Charging characteristics for lead-acid, lead-gel, AGM and lithium batteries
Temperature compensated charge with optional temperature sensor
Charge current Type 25A, short-time 30A
Charging voltage up to 14.7V depending on battery type
Charging characteristic IUOU


Functions: Power supply, battery charging, trickle charge, fully automatic

weight: 0,290 kg

ENDURO Drawbar carrier, gliding BC260 black

Compatible with almost all caravan drawbars
 

Material: aluminium, black

• For 2 bicycles
• E-Bike suitable

 
Max. Payload: 60 kg
Own weight: Approx. 10 kg

Drive-on rail for ENDURO drawbar support BC260

Material: aluminium
 
Foldable to half the length for transport in the trolley.
 
 
Max. Load capacity: Approx. 30 kg
 
 
Weight: Approx. 1.3 kg

Boat Trailer and Caravan Mover - P1

Fully automatic mover - ideal for heavy monoachser up to 2,450 kg

Lightweight drive for your boat trailer including remote control for all commands:

• Waterproof IP67 (up to 2m water depth).
• Stainless steel construction
• Automatic approach to the wheels
• Steering in all directions
• Forward/Reverse
• Soft start for jerk-free slow starting and stopping

 

2 years warranty

Weight: 34 kg

Trailer and Caravan Mover - P1

Fully automatic mover - ideal for heavy monoachser up to 2,450 kg
 
Lightweight drive for your boat trailer including remote control for all commands:
 

• Waterproof IP55 (Protection against water jets according to VDE 0710 DIN 40050)
• Automatic approach to the wheels
• Steering in all directions
• Forward/Reverse
• Soft start for jerk-free slow starting and stopping

 
 
 
2 years warranty

Weight: 34 kg

Temperature sensor for charging booster Schaudt WA 121525

Temperature probe with 3m sensor cable


Weight: 0,2 kg

Motor set, 2 pieces P1 mover motor (spare part) - ATA

 
 
Weight:

2x 4.285 kg

Control unit for P1 manoeuvring system

Control unit for the P1 mover in the fully automatic version

 

Length/width/height:

338 x 146 x 54 mm

 


Weight: 1.08 kg

P1 fastening set consisting of clamps and U-bolts with nuts/washers

Spare part for P1 mover

Weight:

2x clamp, top: 1270g

2x clamp, bottom: 880g

2x U-bracket set: 810g

Swing motor for P1 Mover, actuator (spare part), item 13

 
Weight: xx kg

Remote control Caravan - P1 Mover - A/ATA/S/STA

- Spare part -
 
 
1 years warranty
 
Weight: 145 g

Fastening set U-bracket Enduro drawbar carrier BC260

Original spare part

 

Weight: 365 g