Charging booster WA 121525 for additional batteries

Charging characteristics for lead-acid, lead-gel, AGM and lithium batteries
Temperature compensated charge with optional temperature sensor
Charge current Type 25A, short-time 30A
Charging voltage up to 14.7V depending on battery type
Charging characteristic IUOU


Functions: Power supply, battery charging, trickle charge, fully automatic

weight: 0,290 kg

High Power WHEEL CLAMP 13" - 16"

Anti-theft device suitable for 13 - 16 inch wheels of cars, motorhomes and trailers, provided no truck tyres are mounted.
For tyres with increased load capacity (trucks or heavy SUVs), the wheel claw may not be mounted because the tyre sidewall is too large.

 
Suitable for aluminium and steel rims

System connector X-Fix 10mm distributor 4 outlets

Frost-proof, hot water resistant up to 80°C and pressure resistant

Water flow, hose outside: Ø13-17 mm, hose inside Ø10 mm.
Water distributor flexibly applicable by twisting the connections.
Including nut - no clamp necessary.


With hole for screw for secure fastening.

Submersible pump VIP-PLUS 20l/min

12V connection (2-wire)

Diameter pump 48mm

 

 
Weight 170g

Temperature sensor for charging booster Schaudt WA 121525

Temperature probe with 3m sensor cable


Weight: 0,2 kg

Capri Series Single-lever Mixer Tap – Chrome

Swivel spout – With switch

Thread length: 40 mm

Weight: 350 g

T-tube connector X-Fix

Branch for ø10 mm water hose

System connector X-Fix 10mm distributor 3 outlets

Frost-proof, hot water resistant up to 80°C and pressure resistant

Water flow, hose outside: Ø13-17 mm, hose inside Ø10 mm.
Water distributor flexibly applicable by twisting the connections.
Including nut - no clamp necessary.


With hole for screw for secure fastening.

Battery charger for motorhomes & camping

Comfort charger LAS 1218 BUS 12V 18A
 

 
For lead-acid, lead-gel and AGM batteries

• Can be used as a power supply unit without a connected battery
• Recharges the starter battery with max. 3 A
• No ripple voltage at the output
• High efficiency of approx. 90%

 
 
Battery capacity 180Ah
 
Dimensions LxWxH 150 x 250 x 90mm

 
 
 
 
Weight 1.2 kg

Winterhoff support wheel type ST 48-CW-255

Drawbar support wheel, galvanised, 48 mm ø, with integrated drawbar load indicator
Soft rubber wheel on steel rim

Tube 480 x 48 mm
Wheel 225 x 70 mm
Stroke approx. 220 mm
Drawbar load max. 150 kg

No TÜV entry required. Scale 0 - 125 kg

 
Weight: Approx. 6.6 kg

System connector X-Fix 10mm 3/8"

Adapter for ø10 mm water hose