Charging booster WA 121525 for additional batteries

Charging characteristics for lead-acid, lead-gel, AGM and lithium batteries
Temperature compensated charge with optional temperature sensor
Charge current Type 25A, short-time 30A
Charging voltage up to 14.7V depending on battery type
Charging characteristic IUOU


Functions: Power supply, battery charging, trickle charge, fully automatic

weight: 0,290 kg

System connector X-Fix 10mm distributor 4 outlets

Frost-proof, hot water resistant up to 80°C and pressure resistant

Water flow, hose outside: Ø13-17 mm, hose inside Ø10 mm.
Water distributor flexibly applicable by twisting the connections.
Including nut - no clamp necessary.


With hole for screw for secure fastening.

Submersible pump VIP-PLUS 20l/min

12V connection (2-wire)

Diameter pump 48mm

 

 
Weight 170g

Temperature sensor for charging booster Schaudt WA 121525

Temperature probe with 3m sensor cable


Weight: 0,2 kg

Capri Series Single-lever Mixer Tap – Chrome

Swivel spout – With switch

Thread length: 40 mm

Weight: 350 g

T-tube connector X-Fix

Branch for ø10 mm water hose

System connector X-Fix 10mm distributor 3 outlets

Frost-proof, hot water resistant up to 80°C and pressure resistant

Water flow, hose outside: Ø13-17 mm, hose inside Ø10 mm.
Water distributor flexibly applicable by twisting the connections.
Including nut - no clamp necessary.


With hole for screw for secure fastening.

Battery charger for motorhomes & camping

Comfort charger LAS 1218 BUS 12V 18A
 

 
For lead-acid, lead-gel and AGM batteries

• Can be used as a power supply unit without a connected battery
• Recharges the starter battery with max. 3 A
• No ripple voltage at the output
• High efficiency of approx. 90%

 
 
Battery capacity 180Ah
 
Dimensions LxWxH 150 x 250 x 90mm

 
 
 
 
Weight 1.2 kg

Winterhoff support wheel type ST 48-CW-255

Drawbar support wheel, galvanised, 48 mm ø, with integrated drawbar load indicator
Soft rubber wheel on steel rim

Tube 480 x 48 mm
Wheel 225 x 70 mm
Stroke approx. 220 mm
Drawbar load max. 150 kg

No TÜV entry required. Scale 0 - 125 kg

 
Weight: Approx. 6.6 kg

System connector X-Fix 10mm 3/8"

Adapter for ø10 mm water hose