ENDURO Drawbar carrier, gliding BC260 black

Compatible with almost all caravan drawbars
 

Material: aluminium, black

• For 2 bicycles
• E-Bike suitable

 
Max. Payload: 60 kg
Own weight: Approx. 10 kg

Scoprega Bravo - Electric air pump - GE 20

Reliability and long service life guaranteed!

• Air flow rate: 125 l/min
• With integrated rechargeable battery
• Maximum pressure: 1.5 bar (22.0 PSI)
• Automatic pressure switch-off

Weight: 6.65 kg

System connector X-Fix 10mm distributor 4 outlets

Frost-proof, hot water resistant up to 80°C and pressure resistant

Water flow, hose outside: Ø13-17 mm, hose inside Ø10 mm.
Water distributor flexibly applicable by twisting the connections.
Including nut - no clamp necessary.


With hole for screw for secure fastening.

Scoprega Bravo - Electric air pump - GE 21

Reliability and long service life guaranteed!

• Air flow rate: 125 l/min
• With integrated rechargeable battery
• Maximum pressure: 1.5 bar (22.0 PSI)
• Automatic pressure switch-off

Weight: 6.4 kg

Drive-on rail for ENDURO drawbar support BC260

Material: aluminium
 
Foldable to half the length for transport in the trolley.
 
 
Max. Load capacity: Approx. 30 kg
 
 
Weight: Approx. 1.3 kg

Boat Trailer and Caravan Mover - P1

Fully automatic mover - ideal for heavy monoachser up to 2,450 kg

Lightweight drive for your boat trailer including remote control for all commands:

• Waterproof IP67 (up to 2m water depth).
• Stainless steel construction
• Automatic approach to the wheels
• Steering in all directions
• Forward/Reverse
• Soft start for jerk-free slow starting and stopping

 

2 years warranty

Weight: 34 kg

Trailer and Caravan Mover - P1

Fully automatic mover - ideal for heavy monoachser up to 2,450 kg
 
Lightweight drive for your boat trailer including remote control for all commands:
 

• Waterproof IP55 (Protection against water jets according to VDE 0710 DIN 40050)
• Automatic approach to the wheels
• Steering in all directions
• Forward/Reverse
• Soft start for jerk-free slow starting and stopping

 
 
 
2 years warranty

Weight: 34 kg

Submersible pump VIP-PLUS 20l/min

12V connection (2-wire)

Diameter pump 48mm

 

 
Weight 170g

Motor set, 2 pieces P1 mover motor (spare part) - ATA

 
 
Weight:

2x 4.285 kg

Control unit for P1 manoeuvring system

Control unit for the P1 mover in the fully automatic version

 

Length/width/height:

338 x 146 x 54 mm

 


Weight: 1.08 kg

Capri Series Single-lever Mixer Tap – Chrome

Swivel spout – With switch

Thread length: 40 mm

Weight: 350 g

P1 fastening set consisting of clamps and U-bolts with nuts/washers

Spare part for P1 mover

Weight:

2x clamp, top: 1270g

2x clamp, bottom: 880g

2x U-bracket set: 810g